Thanks for your H2O e3 Cleaning System purchase – Thane UK

What's in the box?

Can’t wait to see what you’ll get with your H2O e3 Cleaning System order?
Take a look at everything in the box.

Here’s how your package will come

What’s in the box

1 x H2O e3 eActivator (this is already attached to part 4)
1 x H2O e3 eSprayer attachment
1 x H2O e3 eMop handle
1 x H2O e3 eMop dock
1 x H2O e3 eMop head + re-usable double sided microfibre cloth (pre-attached)
1 x Power cable with British three pin plug
1 x H2O e3 eSqueegee
2 x H2O e3 mini eSprayers
1 x Measuring spoon
1 x H2O e3 Cleaning System manual (also available here)

Setting up Part 1: Creating your S-Water

Fill the eActivator with 450ml of regular (cold) tap water.
Add 3g of table salt using the provided spoon.
Place the lid on the eActivator and shake for a few seconds to mix the salt and water.
Plug the adapter into the eActivator and press the ON/OFF button (the indicator light will turn red) to begin the electrolysis process.
Wait for 10 minutes (the indicator light will turn green) and then unplug the adapter.
The S-Water™ is now ready to use!
Optional: To improve effectiveness add some white vinegar using the provided spoon and shake to mix in.

NOTE: The generated S-Water™ (with or without vinegar) will be effective for 1-2 weeks. After two weeks, its effectiveness will be lowered considerably.
WARNING: Do not drink, heat, or mix the generated S-Water™ with any cleaning or sanitizing products and keep it out of reach of children

Setting up Part 2: Putting together the eMop

Here’s how to put together and use the eMop.

Install the eMop Head onto the eActivator Holder, as shown in figures a) and b) below.
Connect the two aluminum pipes as shown below in figures c), d), and e).
The buckle hole on the upper aluminum pipe should be aligned with the buckle on the bottom aluminum pipe when connecting. Make sure that the buckle clicks into the buckle hole for secure assembly.